The Enbeam 12 Fibre splice tray has been designed with fibre management in mind. The integrated fibre routing assures the bend radius of the fibre is maintained at all times with tabs to hold the fibre in place. Each tray has a designated area to hold up to 6 double stacked splice protectors.
02
jun
jun
The Excel Enbeam Fibre Optic Adaptor Extraction Tool is designed to facilitate the quick removal of SC, LC and MTP adaptors with metal retaining clips. In modern high density panels and cassettes, it is not always possible to access the adaptor retaining clips, but with this tool it’s easy! Very easy to use, and made…
02
jun
jun
Protective sleeve for the use of fusion splicing pigtails and broken fibres together.
02
jun
jun
Ideal tool to extract LC adapters from high-density patch panel frames and cassettes, where access is difficult. Made from stainless steel with a PE coated handle, it makes LC connector removal quick and easy.
02
jun
jun
Fibre protection tubes give protection whilst oven curing during termination of the fibres. These tubes are made from stainless steel and are suitable for use with all connectors with 2.5mm ferrules.
02
jun
jun
Compression glands are used to provide strain relief for cables as they enter patch panels and wall boxes. The glands are resistant to both benzene and oil. The gland is supplied with a lock nut as standard. Cable diameters from 2.6 mm to 14 mm can be accommodated.
02
jun
jun
Compression glands are used to provide strain relief for cables as they enter patch panels and wall boxes. The glands are resistant to both benzene and oil. The gland is supplied with a lock nut as standard. Cable diameters from 2.6 mm to 14 mm can be accommodated.
02
jun
jun
The Excel fibre Spice tray is designed to manage up to 16 fibres per tray limiting the bend radius of the optical fibre ensuring peak performance. Only to be used with Splice Holders 202-106 and 2mm x 45mm Splice Protectors 200-399.
02
jun
jun
Splice holder for use with the 202-105 splice cassette. Holds up to 8 splice protectors, and each cassette can accommodate 2 splice holders. Provides secure fibre managemant within the cassette.
02
jun
jun
Compression glands are used to provide strain relief for cables as they enter patch panels and wall boxes. The glands are resistant to both benzene and oil. The gland is supplied with a lock nut as standard. Cable diameters from 2.6 mm to 14 mm can be accommodated.
02
jun
jun
Excel’s Cold-Cure Adhesive system allows for fast and reliable termination of all ceramic-ferruled connectors. The combination of anaerobic adhesive and activator ensures a full cure typically within a minute, ensuring high productivity with excellent reliability.
02
jun
jun
Small sharps bin, which is ideal for containment and disposal of fibre shards and general sharp or dangerous waste. The secure and re-sealable lid ensures no spillage. Visible yellow & orange and labelled to indicate hazardous contents. A must for all fibre optic termination practicioners where fibre cut-off ends and syringes are used. Must be…
02
jun
jun
Blanking plugs can be used in part loaded panels to ensure a tidy and professional installation.
02
jun
jun
Hand held needle and 3cc syringe sets, used to load connectors with epoxy prior to termination.
02
jun
jun
A Splice Protector which provides an effective means to cover fibre core once the fusion process has been undertaken. The Stainless steel strengthening rod ensures a stable connection is maintained across the joint of the fibre.
02
jun
jun
A Splice Protector which provides an effective means to cover fibre core once the fusion process has been undertaken. The Stainless steel strengthening rod ensures a stable connection is maintained across the joint of the fibre.
02
jun
jun
Excel splice cassette offers excellent fibre management and protection for up to 24 fibres. Ideal for both primary and secondary-coated fibre. Holds up to 24x 3mm diameter splice protectors (either 61mm or 45mm long). Comes complete with clear lid, label and self-adhesive pads for secure location. These splice cassettes are also stackable and clip together…
02
jun
jun
A compact 24 way Splice Holder which provides an effective means to store up to 24 Fusion Splice Protectors. Ideal for use in patch panels or wall enclosures. The holder can be fixed to any flat clean surface using the self adhesive pad on the base.
02
jun
jun
The Excel Fibre Splice Holde, is a high quality plastic housing with easy place / lift off lid. The unit is designed for up to 48no 2mm Splice Protectors.. The unit can be used in any enclosure and has a self-adhesive fixing pad on the base, making it perfect for both horizontal and vertical fitting.
02
jun
jun
Blanking plugs can be used in part loaded panels to ensure a tidy and professional installation. This plug fits panel apertures for SC Duplex and LC Quad adaptors.
02
jun
jun
A Splice Protector which provides an effective means to cover fibre core once the fusion process has been undertaken. The Stainless steel strengthening rod ensures a stable connection is maintained across the joint of the fibre.
02
jun
jun
The Excel Enbeam splice tray conversion kit has been designed to allow the Environ 100-651 enclosure to be converted into a fibre optic splice enclosure by simply changing the internal fixing plate. With two options of kits available – 48 fibre 200-128 and 240 fibre 200-129 – allows the enclosure to be adapted to part-copper…
02
jun
jun
The Excel Enbeam splice tray conversion kit has been designed to allow the Environ 100-651 enclosure to be converted into a fibre optic splice enclosure by simply changing the internal fixing plate. With two options of kits available – 48 fibre 200-128 and 240 fibre 200-129 – allows the enclosure to be adapted to part-copper…
02
jun
jun
Self-adhesive cable clips are ideal for securing and routing fibre within patch panels and wall boxes. Designed with rounded edges that will not damage the fibre. Easy and quick to install. With high-strength adhesive pad attached to base. Natural finish.
02
jun
jun
Additional splice tray for FOSC Type A Closure. This splice tray holds up to 24 splices and comes complete with fibre tubes and cable ties. It simply clips into the FOSC closure. All FOSC 400 closures have organiser trays that are hinged at one end. Any tray can be accessed without disturbing the others, or…